Kanex HD100FTCL314 Fiche technique

Naviguer en ligne ou télécharger Fiche technique pour Câbles HDMI Kanex HD100FTCL314. Kanex HD100FTCL314 Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
The KanexPro High Speed HDMI cables with Ethernet are designed with built-in booster for applications that
require high-performance transmission of HDMI/DVI digital video and multi-channel audio signals. These cables
have active amplication built-in to prevent impedance mismatch, caused by the cable attenuation, dielectric
losses and compensation for skin effect over long distances. For awless transmission, the output of the cable
is placed at the end of the display to amplify full signal transmission with zero signal loss. The built-in booster
does not require an external power, since it is using the 5-volt from pin 18 on the HDMI cable extracting the
power from the display. These cables are fully CL3 certied which surpasses any in-wall code requirement for
residential or commercial installations.
Sales & Support: (888) 644-4149
PERFORMANCE
RELIABILITY
AND
VALUE
Features
Support color depths to 48 bits
Up to 100 Mbps of bi-directional (full-duplex) bandwidth is
accessible over the HDMI Ethernet Channel
HDCP compliant
No external power required
Available in lengths of 25 feet, 50 feet, 75 feet and 100 feet
High Speed HDMI cables with Ethernet
Built-in booster for active signal amplication
8–levels of selectable equalization
3D and 4Kx2K support (4-times the resolution of 1080p)
Compatible with prior versions of HDMI and DVI
Data rates up to 10.2 Gbps
Specifications
Vertical Frequency: Supports 60Hz & 120Hz DC-Coupled
inputs and outputs
Regulatory Compliance: RoHs compliant and CL3 rated
Temperature: -40°C to +85°C operating range
Triple-layer shielding for EMI/RFI rejection
24 AWG copper wire construction
Standards: High speed HDMI cable with Ethernet
System Management Bus (SMBus): provides control of
boost, output amplitude, enable, and clock channel signal
detect threshold
Data rates: Up to 10.2 Gbps
Color Depth Support: 30 bit, 36 bit and 48 bits (16 bits
per color)
High-resolution HDMI cables with
built-in signal booster
High Speed HDMI cables with Ethernet plus signal equalization
MPNs: HD25FTCL314 - 25ft.
HD50FTCL314 - 50ft.
HD75FTCL314 - 75ft.
HD100FTCL314 - 100ft.
About KanexPro
KanexPro carries a
broad selection of A/V
connectivity products
by leveraging the core
strength in professional
systems enabling
you to broadcast,
convert, extend, split,
or multiply HD signal
transmissions; simply
and cost-effectively.
KanexPro
1405 Pioneer St.
Brea CA 92821
562-501-9380
www.kanexpro.com
09
KanexPro is a trademark. HDMI, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
DVI is a trademark of the Digital Display Working Group. All other product or service names are the property of their respective owners.
Vue de la page 0
1

Résumé du contenu

Page 1 - Specifications

The KanexPro High Speed HDMI cables with Ethernet are designed with built-in booster for applications thatrequire high-performance transmission of HDM

Commentaires sur ces manuels

Pas de commentaire